A well-maintained garage floor is essential for both functionality and aesthetics. However, over time, divots can develop causing an uneven surface and potential hazards. Divots typically refer to the small depressions or indentations on the surface of the concrete. They vary in size and depth and are usually caused by various factors such as heavy objects being dropped, vehicle traffic, salt/harsh road chemicals, or the natural settling of the ground beneath the concrete.
Fortunately, fixing divots in a concrete garage floor is a relatively straightforward process that can be accomplished with some basic tools and materials. Here’s a step-by-step- guide to help restore a smooth surface and the integrity of your garage floor.
Materials you’ll need:
- Broom
- Vacuum or Pressure washer
- Hammer and chisel or grinder
- Concrete repair mix or epoxy-based product
- Trowel or putty knife
- Concrete sealer or coating (optional)
Step 1: Prep the Area
Begin by clearing the garage floor of any loose debris, dirt, or dust. Sweep the garage thoroughly with a broom and use a vacuum or pressure washer to ensure a clean surface for proper adhesion of the repair material.
Step 2: Assess and Clean the Divot
Examine the divot to determine its size and depth. If there are any loose edges or crumbling concrete, use a hammer and chisel or grinder to create clean, defined edges around the divot. This step is key to ensure adhesion of the patching material.
Step 3: Choose and Apply the Patching Material
Select an appropriate patching material based on the depth and severity of the divot. Follow the manufacturer’s instructions for mixing and application. Carefully fill the divot with the patching material, ensuring it slightly overfills the depression. Use the straight edge of a trowel or a putty knife to spread and create a seamless transition with the surrounding floor.
Step 4: Allow for Curing
Give the patching material sufficient time to cure and harden according to the manufacturer’s instructions. Avoid any vehicle or foot traffic during this period!
Step 5: Apply a Concrete Sealer (Optional)
Once the patch has fully cured, you may choose to apply a concreate sealer to the entire garage floor. This step helps maintain a consistent appearance throughout the floor.
Finally, install G-Floor® Garage Flooring to provide additional protection and prevent future damage. G-Floor® is easy to install, 100% solid polyvinyl, waterproof, and slip-resistant. Offered in multiple sizes and colors to accommodate any garage and provide superior protection.
Avoid future damage and improve the appearance of your garage floor by fixing divots and covering your floor with G-Floor® Garage Flooring. It’s time to give your garage an upgrade! Shop G-Floor® Garage Flooring here!